Alex is a co-founder of Sprintlaw. Alex previously worked at a top-tier firm as a lawyer specialising in technology and media contracts, and founded a digital agency which he sold in 2015.
Yes, you can usually end a contractor arrangement if your contractor agreement gives you the right to do so and you follow the process in that agreement.
The more careful answer is that termination can become risky if the person has been treated more like an employee than an independent contractor. The contractor gateway test in NZ can help you work out where you stand, but it isn't a free pass to end every contractor relationship without employment law risk.
If you're about to end a contractor arrangement, the safest move is to check the contract, check how the relationship has worked in practice, and fix any future contractor documents before the same problem repeats.
Can You Fire A Contractor Under The Gateway Test?
Yes, but you aren't really 'firing' them in the employment sense. You're terminating a commercial contract.
That distinction matters. Employees have protections under the Employment Relations Act 2000, including rules about fair process and unjustified dismissal. Independent contractors generally don't have those employee rights. Their rights usually come from the contract, plus general business laws such as the Fair Trading Act 1986 and health and safety obligations where relevant.
The Employment Relations Amendment Act 2026 introduced the contractor gateway test to give businesses and workers a clearer way to identify some genuine contractor relationships. If the relationship meets the gateway test, it's much less likely that the person can later argue they were actually your employee.
That helps with termination because your main question becomes: what does the contract say about ending the arrangement?
Usually, you'll be looking for:
- whether either party can terminate for convenience
- how much notice you need to give
- whether there's a fixed term or minimum commitment
- what happens to unpaid invoices and final work
- whether confidentiality, IP and restraint clauses continue after termination
If the gateway test isn't clearly met, ending the relationship may carry employment law risk. The contractor may say they were really an employee and that the termination was an unjustified dismissal, so contractor status advice may be needed. That doesn't mean you can't end the arrangement, but it does mean you should slow down and get tailored advice before sending the termination email.
What Is The Contractor Gateway Test In NZ?
The contractor gateway test is a legal test that can confirm someone is an independent contractor if the relationship meets specific criteria.
Under the Employment Relations Act 2000, as amended by the Employment Relations Amendment Act 2026, the gateway test looks at whether your arrangement has the key features of a genuine contractor relationship. In practical terms, you should check whether:
- there's a written contractor agreement that says the person is an independent contractor
- the person had a reasonable opportunity to seek independent advice before entering into the contractor arrangement
- the person isn't restricted from working for other businesses, including competitors
- the person isn't required to be available on specified days, at specified times or for minimum periods, unless the subcontracting or delegation requirements are properly met
- if set days, times or minimum periods are required, the person is allowed to subcontract or delegate the work, and any vetting of the substitute is limited to statutory requirements or checks that are justified for relevant qualifications or criminal record matters
- the person can turn down extra tasks, engagements or pieces of work without you terminating the relationship for that reason
If all of those points are satisfied, the gateway test should support contractor status. If one or more points are missing, that doesn't automatically make the person an employee. Instead, you fall back to the broader contractor vs employee assessment in New Zealand, which looks at the real nature of the relationship.
That broader assessment can include things like:
- how much control you have over how, when and where the work is done
- whether the person works inside your business like a team member
- whether they provide their own tools, equipment and insurance
- whether they invoice you and carry business risk
- whether they can profit from managing the work efficiently
- what both sides intended when the relationship started
The gateway test is useful, but it isn't just a paperwork exercise. If the written contract says 'independent contractor' but you roster the person like staff, ban them from working elsewhere and require them to accept every shift, the termination risk is much higher.
When Should You Update The Contractor Agreement Before Ending It?
You should update the agreement before termination if the relationship is continuing, if you plan to offer more work, or if your current document doesn't match how the arrangement actually works.
There's an important timing point here. If you have already decided to terminate, asking the contractor to sign a new agreement that fixes old problems can look awkward and may not solve the risk. A new contract usually works best for the future, not as a quick repair job for a relationship that has already gone off track.
You should consider updating the contractor agreement before ending the arrangement if:
- you want to keep using the contractor for a transition period
- you want to move them from regular hours to project-based work
- the current agreement has no termination clause
- the agreement says they're a contractor, but your actual process looks like employment
- you're ending one statement of work but may offer new work later
- you use the same template for other contractors and need to reduce future risk
For example, say Maia runs a marketing agency in Wellington. She has a designer, Leo, on a contractor agreement at $1,200 plus GST per week. The agreement says either party can terminate on 14 days' notice, but Maia has also required Leo to work 9am to 5pm, Monday to Friday, and has told him he can't do design work for other agencies.
If Maia simply gives 14 days' notice, she may still face a contractor status argument because the day-to-day relationship doesn't sit comfortably with the gateway test. A better approach is to get advice first, check whether the contract reflects the real working arrangement, and decide whether to end the relationship now or restructure it properly for future project work.
How Do You Terminate A Contractor Agreement In NZ?
You terminate a contractor agreement by following the contract first, then dealing clearly with final work, payments and handover.
There's no general statutory notice period for independent contractors in New Zealand like there's for employees. The notice period is usually whatever the contract says. If the contract is silent, you may need to give reasonable notice, and what is reasonable depends on the relationship, the length of engagement, the type of work and the commercial impact on both sides.
A Practical Termination Process
- Read the termination clause. Check whether you can terminate for convenience, whether notice must be in writing, and whether email is allowed.
- Check the reason for termination. If you're ending the arrangement because the contractor refused more work, check the gateway test and employee or contractor status carefully.
- Confirm the notice period. Use the exact period in the agreement, such as 7, 14 or 30 days, if one is stated.
- Identify the final deliverables. Be clear about what work must be finished before the end date.
- Work out final payments. Confirm unpaid invoices, approved expenses and any disputed amounts.
- Collect business property and access. Remove access to systems, client files and confidential information at the right time.
- Keep records. Save the contract, invoices, emails, work briefs, notices and handover messages.
A simple termination notice might confirm the clause you're relying on, the last day of the engagement, what work should be completed, when final invoices are due, and who will handle the handover.
Keep the tone calm and commercial. You don't need to write a long explanation unless the contract requires it. A short, accurate notice is usually better than an emotional email sent in a rush.
What If The Contractor Might Really Be An Employee?
If the contractor might really be an employee, pause before terminating and assess the relationship against both the gateway test and the broader employee status factors.
This is where many businesses get caught. The problem isn't just the label in the agreement. The problem is whether the working relationship, viewed as a whole, looks like employment.
Higher-risk signs include:
- you require the contractor to work fixed hours every week
- you control the way they do the work in detail
- they wear your uniform or appear to customers as part of your staff
- they can't work for other clients
- they use your equipment and systems in the same way as employees
- you pay them a regular amount that looks like wages rather than project fees
- they must personally do the work and can't send someone else
- they have been with you for a long time in an ongoing role
If the person is found to be an employee, the consequences can be practical and expensive. You may need to deal with claims linked to unjustified dismissal, minimum employment standards, holiday and leave entitlements under the Holidays Act 2003, wage records, payroll treatment and KiwiSaver obligations. You may also need to adjust how you engage similar workers going forward.
For example, a cafe in Auckland engages Sam as a 'contractor' for 30 hours each week at a set hourly rate. Sam is rostered by the manager, wears the cafe's branded shirt, can't send anyone else, and needs permission to take time off. Even if Sam signed a contractor agreement, ending the arrangement on two days' notice could create employee status risk.
In that situation, you would want tailored advice before acting. The best next step may be a proper employment process, employee termination documents, a negotiated transition, or a carefully planned termination under the commercial contract, depending on the facts.
What Should Your Contractor Agreement Say About Ending The Relationship?
Your contractor agreement should clearly explain how the relationship can end and what happens afterwards.
A short template can be tempting, especially when you're moving quickly. The trouble is that templates often miss the parts that matter most when a relationship ends. A contractor agreement works best when it's tailored to how your business actually uses contractors.
Contractor Termination Clause Outline
You can use this outline to brief your legal team, but it should be tailored before you use it.
- Parties and role. Name the business and contractor, and describe the services or project.
- Status of the relationship. Say the person is an independent contractor and is responsible for how they run their business.
- Scope of work. Set out deliverables, milestones, standards and any statement of work process.
- Fees and invoicing. Explain rates, GST, invoice timing, payment dates and approved expenses.
- Availability and freedom to work elsewhere. Confirm whether the contractor can accept other clients and how work is offered.
- Independent advice. Include a clear acknowledgement that the contractor had a reasonable opportunity to seek independent advice before entering the arrangement.
- Subcontracting or delegation. State whether the contractor can use others, and whether a sub-contractor agreement, approval or quality requirements are needed. If you require set days, times or minimum periods, any vetting should be limited to the permitted grounds.
- Termination for convenience. Set out whether either side can end the agreement without cause and the notice period.
- Termination for breach. Explain what happens if there's serious non-performance, confidentiality breach or other default.
- Final handover. Cover return of property, transfer of files, final invoices and access removal.
- IP and confidentiality after termination. Confirm who owns work product and which obligations continue.
If you're updating an agreement before ending a relationship, be careful not to create a document that says one thing while your day-to-day process says another. For the gateway test, your agreement and your actual practices need to line up.
That may mean changing how you offer work, avoiding fixed rosters for contractors unless the subcontracting and vetting requirements are properly handled, allowing them to work for others, and making sure they can say no to extra work without being punished for it.
Key Takeaways
- You can usually terminate a contractor arrangement if your agreement allows it and you follow the agreed notice process.
- The contractor gateway test in NZ helps confirm contractor status, but only where the written agreement, opportunity for independent advice and day-to-day arrangement meet the criteria.
- If the relationship looks like employment, termination can create risk under the Employment Relations Act 2000 and related minimum employment standards.
- Before ending the arrangement, check the termination clause, the reason for termination, final payments, handover and system access.
- Update contractor agreements before problems arise, especially if you use contractors regularly or rely on the same template across your business.
- Documents work best when they match the real relationship, not just the label you put at the top.
If you'd like help with contractor agreements, termination processes, contractor status checks or updating your business documents after the gateway test changes, you can reach us at 0800 002 184 or team@sprintlaw.co.nz for a free, no-obligations chat.
Drafted by Taylor, Sprintlaw's AI, and overseen by Alex Solo. How we write
Lock in the contract
Turning the information into a usable contract
Once money, deliverables or customer obligations are involved, the next step is usually a clear contract that matches how the business actually works.







